Home > ccie resources > External Connections

Acting as a DHCP Client

Setting an IOS device to be a DHCP client is easy. The command is supplied in interface configuration mode. Instead of supplying an IP and mask, the IP address command is used to specify DHCP:  Router(config)#interface fastethernet0/0  Router(config-if)#ip address dhcp  This is a quick and painless way to get remote offices and SOHO users up and running 

RTS/CTS

The 802.11 standard defines request-to-send/clear-to-send (RTS/CTS) as an optional function of 802.11 to regulate the transmission of data on the wireless LAN. RTS/CTS can be set in the access point or a radio card individually, or on both devices at the same time. In most cases, the RTS/CTS function is helpful in counteracting collisions between hidden nodes. To gain access to the shared wireless medium, a station can only transmit if no other station is transmitting. Within..

IOS XR Basic EIGRPv6 Configuration On PE: Example

The following example shows how to configure EIGRP with a policy that filters incoming routes. This is a typical configuration for a router that has just one neighbor, but advertises other connected subnets.   router eigrp 100    vrf ABC     address-family ipv6       router-id 10.10.9.4       log-neighbor-changes       log-neighbor-warnings    &nbs..

918. RJ-45 Pinouts and Category 5 Wiring

You should know the details of cross-over and straight-through Category 5 (Cat 5) or Cat 5e cabling for most any networking job. The EIA/TIA defines the cabling specifications for Ethernet LANs (http://www.eia.org and http://www.tiaonline.org), including the pinouts for the RJ-45 connects, as shown in Figure 1-1. Figure 1-1. The most popular Ethernet standards (10BASE-T, 100BASE-T, and 1000BASE-T) each use two twisted pairs (specifically pairs 2 and 3 shown in Figure 1-1), ..

The Standardization of Frame Relay

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} The move to standardizing Frame Relay started with initial proposals submitted in 1984 to the International Telecommunication Union Telecommunication Standardization Sector (ITU-T), formerly the Consultative Committee for International Telegraph and Telephone (CCITT), ( http://www.itu.ch). However, things did not move quickly un..

Contact Us

86-136-2222-6316
CALL ME NOW

© 2011 CathaySchool, an ANDA Technology Group company, All Rights ReservedPrivacy Policy | Refund Policy | Disclaimer | Sitemap | Resources Tags